2026 Autocar ACX® 4X2

Information

2026 Autocar ACX® 4X2

Severe Duty Cabover

Custom built for durability, power, and performance, the ACX has been trusted by professionals for decades. Whether it’s picking up refuse or pumping concrete, this workhorse is relentless and built to last.

Features may include:

  • Galvannealed Steel Cab
  • Is more robust than aluminum featuring two-sided galvanized steel. Its rivetless construction requires less maintenance.
  • B-Pillar Windows.
  • Maximizes visibility and safety. Contributes to 324.5 degree visibility from driver's seat (that's 90% of 360) Removable for easy, quick maintenance.
  • Roomiest Available Cab
  • Visibility, comfort, and durability make the ACX the preferred severe-duty workspace. Autocar offers a severe service cab with all-welded steel construction for strength, weight savings, and driver safety
  • Adjustable Steering Wheel
  • Tilt and reach- adjustable allows for easier operation and more belly room
  • Righthand Drive Options
  • Available in Right-hand Stand-up (RHS) and Standard door layouts and four different driving configurations
  • Constant Torque Clamps
  • Vibrationless constant torque clamps keep connections secure, prevent wear and tear. Avoid mishaps and wasted time on route. Makes electronics and engine maintenance easier. Reduces costs and damage liability. Avoids downtime as well.
  • Clips and Hangers
  • Keep wiring from rubbing against the frame, helping prevent electrical shorts

Photos

Highlights

  • Edison, New Jersey
  • 2026
  • Autocar
  • ACX® 4X2
  • Cummins 2021 L9 rated from 300 hp to 380 hp | Cummins 2021 X12 rated from 350 hp to 500 hp | Cummins L9N (natural gas) rated from 300 hp to 320 hp | Cummins ISX12N (natural gas) rated at 330 to 350 hp
  • Model: Allison 3000 RDS (not available with X12 or ISX12N) | Allison 4000RDS | Gearing: 5 or 6-speed | Controls: Allison push button | Cooler: Remote mounted oil to coolant layered core oil cooler | Lubricant: TES 295 Allison approved synthetic auto trans fluid
  • Available

Specifications

  • 2026
  • Autocar
  • ACX®
  • 4X2
  • Conventional without Sleeper
  • Cummins 2021 L9 rated from 300 hp to 380 hp | Cummins 2021 X12 rated from 350 hp to 500 hp | Cummins L9N (natural gas) rated from 300 hp to 320 hp | Cummins ISX12N (natural gas) rated at 330 to 350 hp
  • Diesel: Horizontally mounted SMA (single module aftertreatment) with LHVE (left hand vertical exhaust) | Horizontally mounted SMA (single module aftertreatment) with RHVE (right hand vertical exhaust) | Gas: Horizontally mounted 3-way catalyst on BOC with LHVE (Left hand vertical exhaust) | Horizontally mounted 3-way catalyst on BOC with RHVE (Right hand vertical exhaust) | Horizontally mounted 3-way catalyst on BOC with RHUFE (Right hand under frame exhaust) (CNG only) | Horizontally mounted 3-way catalyst on frame rail with RHUFE (Right hand under frame exhaust) (L9N only)
  • Electrical operated cooling fans
  • 15 inch single stage EPG | 15 inch single stage with safety element EPG | 16 inch 2 stage
  • 2-speed fan drive | On/Off fan drive | Variable speed fan drive
  • Dana Spicer® half-round, yoke size 1710, 1760 or 1810 dependent on transmissions and driveline rotational speeds
  • Model: Allison 3000 RDS (not available with X12 or ISX12N) | Allison 4000RDS | Gearing: 5 or 6-speed | Controls: Allison push button | Cooler: Remote mounted oil to coolant layered core oil cooler | Lubricant: TES 295 Allison approved synthetic auto trans fluid
  • Cab drive configuration: Single LH drive | Single RH drive | Dual drive dual sit | Dual drive RH standup | Single LH drive RH standup
  • Sheppard M100PPV3 with assist ram
  • Model: Meritor MFS-20 | Meritor MFS-18 | Meritor MFS-16 | Dana D-2200W | Hendrickson Steertek 20K
  • Model: Meritor RS23-160 | Meritor RS30-185 | Dana S30-190 | Rear axle ratio: 4.33 to 7.17 Dependent on axle model, vehicle configuration and application
  • Column: Adjustable for tilt on single drive cab configurations | 16 or 18 inch diameter
  • Meritor 16.5 x 6 QP | Meritor 16.5 x 7 QP
  • Meritor 16.5x7 QP | Meritor 16.5 x 8.62 QP | Meritor 16.5X7 SSQ
  • 7,500 lb Flat leaf rated at 16,500 lb capacity | 8,500 lb Flat leaf rated at 18,800 lb capacity | 9,500 lb Low camber flat leaf rated at 20,800 lb capacity | 10,100 lb Flat leaf rated at 22,000 lb capacity | 10,200 lb Taper leaf rated at 22,000 lb capacity | Hendrickson 20K taper leaf front suspension (Only available with Steertek axle)
  • PAX EX-232 air ride rated at 23,000lb capacity | Reyco 102CC rated at 31,000 lb capacity
  • Available in 3 inch increments between 138 inch and 258 inch
  • 3/8 inch Variable drop rail | 120 kPsi heat treated steel | RBM of 3,259,000 lb.in to 4,220,000 lb. in dependent on drop configuration and liners
  • The cab is constructed from corrosion-resistant steel followed by a Cathodic Electrocoat dip process before the top coat is applied | Doors: Steel doors with power or manual crank window regulators | Aluminum fold-up doors for stand-up and low entry options
  • Black or chrome plastic housing with dual pane mirrors. Options include power adjustment, heat and integrated marker lights
  • Device: Two tow pins integral with front crossmember
  • Radiator: 1300 sq. inch aluminum , 1118 sq. inch bar plate | Coolant hoses/piping: Silicone hoses with constant tension clamps | Coolant: Extended life coolant | Heavy-duty front end: Available for severe duty service applications such as snow plowing | Heavy-duty front end: Available for severe duty service applications such as snow plowing | Cab climate control system: 30,000 BTU air conditioner with heater |
  • Driver seats: National Cush II low back air ride | Sears C2 air ride | Sears C2+ air ride | Sears C2+ air ride with air lumbar support | Sears C2+ air ride with air lumbar support and headrest | Various Bostrom selections | Passanger seats: Fixed type low back | Sears C2 fixed or air ride | Sears C2+ fixed or air ride | Sears C2+ air ride with air lumbar support | Sears C2+ air ride with air lumbar support and headrest | Various Bostrom selections